Substrate: wood lines, MDF, wood plastic, plastic steel, PVC, aluminum profiles and other lines. Substrate request: for regular line profiles, may have grooves, curved surface, but each point must be vertical straight line, there is a certain pressure resistance, the length of the same ordinary for more than 40 centimeters to infinity. Facing materials: PVC decorative film, decorative paper, solid wood skin, Boeing board, composite aluminum film, etc.. The width is determined according to the substrate requirements and the selected type, and the same is less than 50 centimeters.
For example, 300 type universal coating machine, the widest width of film covering is 30 cm. Equally commonplace use of volume. At present, the market also has 100 centimeters next to the ultra wide profile. Solid wood skin, but it can also be a single sheet, solid wood skin as ordinary as the bottom, with non-woven fabric, non-woven fabric surface material can not penetrate, and easy to break at the corner.
Universal wrapping machine is equally divided into two typical examples: cold glue and hot glue.
Application of liquid glue in cold glue coating machine. The liquid glue can be divided into solvent glue and water glue, and the gluing method is WBF-300 type
There are two kinds of scraping and roller coating. The volatile solvent glue is scraped and coated, and the rubber box is easy to seal, so as to prevent the coating gum from volatilization. Water based adhesive and volatile solvent glue are equally applied to roll coating, which is easy to control.
Hot glue coating machine, using solid glue, in the coating machine hot glue box
The heating temperature is 220 degrees by the same ordinary covering glue when the inner heating is melted. Suitable for coating solid wood skin and decorative paint paper.
Combination type coating machine, in order to meet the different production needs, universal coating machine with cold glue glue combination type, cold glue scraping roller combination type, mesh special type etc..